Mcmurdo NAV6 Guía de usuario descargar pdf (Pagina 38)

Nav6 Plus Navtex System User Guide

• Setup the Navtex print filtering to select which message types

from which stations should be printed; see Setup Mode⇒

⇒⇒

⇒Navtex

View⇒

⇒⇒

⇒Options Page⇒

⇒⇒

⇒Print Setup.

• Enable Navigate auto print and set the logging interval; see

Setup Mode⇒

⇒⇒

⇒Navigate View⇒

⇒⇒

⇒Options Page.

• Enable Navigate manual print if you want to be able to print the

current page of log entries from the navigation log using the

PRINT softkey on the Navigate Mode⇒

⇒⇒

⇒Log View.

Auto printing of Navtex messages should now occur when new

Navtex message transmissions are received from the selected

stations. Auto printing of Navigation logs should now at Navigate

logging intervals.

OUTPUT TO A PC OR PLOTTER

OUTPUT TO A PC OR PLOTTEROUTPUT TO A PC OR PLOTTER

OUTPUT TO A PC OR PLOTTER

The Nav6 can be setup to output Navtex messages to a PC or

compatible chart plotter. Setup the Nav6 as per “Setting up a printer”

but with the following exceptions:

• Instead of connecting a serial printer , connect the PC or chart

plotter.

• To test the PC connection, run a terminal application with the

serial port set to 4800 baud, 8 data bits, 1 stop bit, no parity and

print a Navtex message at the Nav6.

• Set the Navtex output format to “Data”; see Setup

Mode⇒

⇒⇒

⇒Navtex View⇒

⇒⇒

⇒Options Page. This formats the Navtex

messages for processing by chart plotter applications.

INSTALLATION OF SENSOR UNIT

INSTALLATION OF SENSOR UNITINSTALLATION OF SENSOR UNIT

INSTALLATION OF SENSOR UNIT

The Sensor Unit is a rugged waterproof unit, but care should be

taken during installation to prevent damage that may lead to

subsequent water ingress.

• The Sensor Unit should be mounted so that the whip is

approximately vertical.

• The Sensor Unit can be screwed into a standard marine antenna

rail mount (1" 14 tpi thread or ICS part number 903.03).

• The mounting position should avoid any adjacent obstructions

caused by the superstructure etc.

• The Sensor Unit should be located at least 0.5metres away from

any other electronic equipment including GPS antennas, Radar

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Comentarios a estos manuales

Sin comentarios

Mcmurdo NAV6 Guía de usuario Pagina 38

Comentarios a estos manuales